Whether y’all’re a beginner or an expert, 3D printing with resins can be an feel that reaps higher quality prints without the finickiness of filaments. At present with the affordable Elegoo Mars 3D Printer, you tin can bring this quality into your dwelling house.
Elegoo Mars UV Photocuring LCD 3D Printer Specifications
Max Print Size:
120 mm 10 68 mm x 155 mm
Assisted bed leveling, not heated
22 mm per hr
Elegoo Photopolymer Resin, 405 NM UV resins
twoscore W UV LED light bed
What can Elegoo practise for you?
The Elegoo Mars UV Photocuring LCD 3D Printer gives users an enormous bang for their buck. The simplistic, but the sturdy design is piece of cake to apply right out of the box. It only takes a few minutes to take it out, plug it in, level the plate, and queue up your start print.
The impress bed attaches and calibrates easily considering of its internal ball balancing mechanism. There’s a reservoir to take hold of the excess resin as the build progresses. Every layer of the build is cured individually, which contributes to the lengthy print time.
Flat LCD panels reflect the LED lights to cure the resin directly onto the build area in a parallel design. The 40W LED lite source is higher than Elegoo’s more expensive competitors. At its affordable price, this 3D printer packs a punch with an industrial-form design made with aluminum. I of the other interesting features is the tinted orangish cover which stops the curing of the resin from regular UV rays of daylight.
Some other smashing feature that makes the Elegoo Mars 3D printer like shooting fish in a barrel to use is the 3.5-inch touchscreen. The settings are a cakewalk to adapt and make printing offline unproblematic. At that place’s no demand to bollix around with filaments, powders, extruders, or swapping out spools.
Elegoo offers a wide diverseness of colors for their resins, but the printer is compatible with 405 NM UV resins likewise. The flexibility to use 3rd party resins broadens your power to experiment with unlike colors. Exist prepared to tinker with the exposure times as every color requires a different adjustment.
Is Press with the Elegoo Mars Printer Out of This World?
Delight brand certain to use gloves when handling UV resin, or whatever kind of photocuring polymer. Exercise Not Go IT ON YOUR SKIN. If you lot do, wash information technology off immediately with soap and h2o. It’southward believed that the resin tin be absorbed into the pare and even cured producing an extreme sensitivity to the chemical compound which may issue in extreme reactions whenever resin touches your pare.
So at present that yous’re wearing your gloves, put on the mask also since many users accept constitute themselves sensitive to the odor as well. Choose the color of your resin and suit the settings and exposure time so that it cures correctly. In one case the build is finished, information technology’s recommended to allow the project cure for an additional 30 minutes to an 60 minutes in the sunlight or nether a UV lamp.
The 2560 x 1440 resolution of the 2K Hard disk drive masking LCD allows for high-quality prints that eliminate the layered look you typically get when press with filaments. The downside to this is the build time. Information technology’s extremely slow, but it appears to be worth it. Make certain that you’re using the ChiTu Box software and add bleed holes to the job to forestall loose resin from sitting in the hollowed-out spaces of the build.
Something else to consider is that resin is messy. In that location are funnel filters provided with the packaging to empty the printer’s reservoir back into the bottle while immigration out whatever debris. You can also opt to put downwards a dropcloth while working with the printer. Withal, as messy as resin may be to use, it’due south like shooting fish in a barrel to make clean up. Cleaning upwardly the printer later every employ is strongly recommended.
Being that the builds are existence moved upwardly layer past layer out of the resin, it tin can be hard to tell if it’s going as planned. Luckily, there’s a intermission button that will cease the job, lower the lift and and so move all the mode to the top. You’ll be able to check for adept adhesion to the print bed and if the print is a neglect before it takes the rest of its many hours to finish the task. You lot may get a slight line from where it stopped, only if you catch something that needs to be fixed the line will exist worth it. Besides, resins take on paint very well so you’d be able to paint over any blemishes if you adopt.
Unpacking Your Elegoo Mars UV Photocuring LCD 3D Printer
The printer is very easy to assemble out of the box if you lot tin even call information technology that. Add your resin to the printer, make certain the print bed is level, slide on the embrace, and print your job off of the USB. Here’s a list of everything you get in the box:
- Mars 3D Printer
- Build Platform
- Resin Tank
- U Disk
- Measuring Cup
- ten Funnels
- FEP Release Liner
- UC Adapter, 60W
- User Education Guide
- Tool Kit
Where’due south Assistance When Y’all Need It? – Elegoo Customer Support
There’southward a ane-year total automobile warranty, only it doesn’t include the 5.v-inch 2K LCD or the FEP film. Contacting customer service seems to be easy from the visitor’s website. There’s also a Facebook grouping Elegoo created to help troubleshoot, and get community opinions on any questions you lot may take using the machine. Overall reviews say they’re very helpful, responsive, and accommodating should you demand to return or replace any parts.
The Skilful and the Bad with Your Elegoo
Elegoo Mars 3D Printer PROS:
- Swell single-program solution with the ChiTu Box Slicer
- Easy setup and apply is great for novices and experts
- UV LED Light source
- Compatible with tertiary political party resins
- Like shooting fish in a barrel to clean upward
- High-quality prints without layer lines
Elegoo Mars 3D Printer CONS:
- The fan is loud which can spread the less than stellar odor of the resins
- The USB port is in an awkward position behind the machine
- Information technology’s slightly messy to apply and the print time is very wearisome
To Buy or Not to Buy: That Is The Question
The Elegoo Mars UV Photocuring LCD 3D Printer is affordable, lightweight, but very sturdy with its aluminum industrial blueprint. It requires very little assembly out of the box and is easy to use regardless if you’re a novice or an expert in the 3D press earth. Its high-quality resin prints make information technology a smashing buy for the list price.