Iphone Remote Won’t Connect To Apple Tv

by -102 views

When you lot power on your Apple Telly, the remote should connect automatically in 3-5 seconds. If information technology doesn’t, keep pressing the power button until a “Remote Connected” notification appears on the screen.

If your Apple Boob tube isn’t responding to remote inputs, the troubleshooting recommendations below should get the remote working again.

1. Move the Remote Closer to the Apple TV

Get-go things kickoff: Make sure your Apple TV and its remote are inside connection range. The Siri Remote (2nd-generation) communicates with compatible Apple TV devices via Bluetooth 5.0—works best inside a 40-meter connexion range. The Bluetooth 4.0-powered 1st-generation Siri Remote has a maximum connection range of x meters.

1st and 2nd gneration Siri Remotes

The white and aluminum Apple Remotes with removable batteries have a shorter connection range (5-six meters) considering they utilise IR transmitters.

Aluminum and White Apple Remotes

Motion your Apple Remote or Siri Remote closer to the Apple Television receiver and ensure the distance apart doesn’t exceed their respective connection ranges.

We should also mention that electronic devices, appliances, or furniture may block remote signals from your Apple TV remote. For instance, someone in this Apple Community forum resolved input lag issues by moving his Apple tree Idiot box a few inches abroad from a surge protector. The surge protector was interfering with the Bluetooth signal from the Siri Remote.

Don’t hide your Apple tree TV box backside a concrete wall, Television, or TV console. Also, ensure your remote has a clear line of sight to the Apple tree Boob tube.

ii. Use a Shielded HDMI Cable

Shielded HDMI cable

Using an unshielded or poorly-shielded cablevision with an Apple tree Boob tube 4K tin interfere with Wi-Fi networks and Bluetooth remote signals. Switching to a shielded high-speed HDMI cable from Apple can prepare Apple tree Television set remote lag issues and Wi-Fi connectivity issues. That worked the magic for many Apple tree Idiot box 4K users in this Apple tree Community forum.

3. Apply the Siri Trick

Another trick nosotros discovered (in this Reddit thread) is using Siri to bring an unresponsive Siri Remote back to life.

Press and hold the
Siri button
on your remote, inquire Siri a random question, and release the Siri button.

Siri buttons on 1st and 2nd generation Siri Remotes

Your Apple tree TV HD or Apple TV 4K should at present find and respond to the remote. Press the
Back button
TV/Control Center push button
to shut Siri.

4. Accuse the Remote

The Apple tree TV remote should last several months on a full accuse. You’ll go notifications to charge the remote when the battery level falls beneath 20%. Your Apple Boob tube won’t detect or respond to keypresses when the remote’southward battery is dead or damaged.

Cheque the remote’s battery level before recharging the congenital-in battery or inserting a new battery. If your Apple tree TV is paired with your iPhone, iPad, or iPod affect, apply the Apple tree Television receiver Remote app in the Command Center to check the remote’southward bombardment status.

Open the
Command Heart, tap the
Apple Tv set Remote icon, and expect for the app to detect your Apple TV automatically. Otherwise, tap the “Cull a Boob tube” driblet-downwards menu and select your Apple tree TV.

Apple TV Remote icon > Choose a TV > Living Room” class=”wp-image-17741″ srcset=”https://www.switchingtomac.com/wp-content/uploads/2022/06/06-fix-apple-tv-not-responding-remote-iphone-ipad.jpg 1024w, https://www.switchingtomac.com/wp-content/uploads/2022/06/06-fix-apple-tv-not-responding-remote-iphone-ipad-300×216.jpg 300w, https://www.switchingtomac.com/wp-content/uploads/2022/06/06-fix-apple-tv-not-responding-remote-iphone-ipad-768×554.jpg 768w, https://www.switchingtomac.com/wp-content/uploads/2022/06/06-fix-apple-tv-not-responding-remote-iphone-ipad-320×231.jpg 320w, https://www.switchingtomac.com/wp-content/uploads/2022/06/06-fix-apple-tv-not-responding-remote-iphone-ipad-640×461.jpg 640w, https://www.switchingtomac.com/wp-content/uploads/2022/06/06-fix-apple-tv-not-responding-remote-iphone-ipad-360×259.jpg 360w, https://www.switchingtomac.com/wp-content/uploads/2022/06/06-fix-apple-tv-not-responding-remote-iphone-ipad-720×519.jpg 720w, https://www.switchingtomac.com/wp-content/uploads/2022/06/06-fix-apple-tv-not-responding-remote-iphone-ipad-800×577.jpg 800w, https://www.switchingtomac.com/wp-content/uploads/2022/06/06-fix-apple-tv-not-responding-remote-iphone-ipad-610×440.jpg 610w, https://www.switchingtomac.com/wp-content/uploads/2022/06/06-fix-apple-tv-not-responding-remote-iphone-ipad-69×50.jpg 69w” sizes=”(max-width: 1024px) 100vw, 1024px”><br />
<p>Afterward, head to<br />
            <strong>Settings</strong><br />
            ><br />
            <strong>Remotes and Devices</strong><br />
            ><br />
            <strong>Remote</strong><br />
            on your Apple Telly, and cheque the remote’southward “Battery Level.”</p>
<div class=
Battery Level in Remote

If your Apple TV uses a Siri Remote, accuse it for at least xxx minutes using a USB to Lightning cablevision. Then, unplug the remote from the charger and press the power button.

Utilize an accurate Apple-certified cablevision, preferably the USB cable that shipped with Apple Goggle box.

Counterfeit or knock-off cables may not charge the remote. Even worse, information technology can damage the remote or its batteries.

For Apple Remotes with removable battery blueprint, remove and replace the erstwhile/dead battery. You’ll find the bombardment compartment either on the lesser or the back of your Apple tree Remote.

Battery Compartment in Aluminum and White Apple Remotes

Refer to Apple’southward official tutorial on replacing Apple tree Remote’s battery for detailed instructions. Contact Apple Support or visit a nearby Apple Store for technical aid.

v. Restart the Remote

Continue your Apple Idiot box on, ensure the remote is charged, and follow the steps below:

  1. Press and hold the
    Control Center/TV
    push and
    Volume Down
    button together for at to the lowest degree 5 seconds. While at information technology, go along an eye on your Apple TV’s status lite.
  2. Release the buttons when the Apple Boob tube’s status low-cal flashes. A “Remote Connectedness Lost” notification should pop up in the elevation-right corner of your Apple Boob tube screen.
"Remote Connection Lost"

  1. In about 5-10 seconds, a “Remote Connected” bulletin should reappear in the same position.
"Remote Connected"

half dozen. Reconnect the Apple Tv and Remote

If your Apple tree TV is however non responding to remote input, unpair the remote and pair it again from scratch.

Reconnect Siri Remote to Apple tree Boob tube

Here’s how to pair Siri Remotes or Apple TV Remotes with Siri back up dorsum to your Apple TV:

  1. Motility the Siri Remote close to the Apple tree TV—non farther than iii to four inches (8 to 10 cm). If possible, identify the remote on the Apple Tv set box.
  2. Press and hold the
    Book Upwards
    buttons for at least 5 seconds. On the 1st generation Siri Remote, printing and hold the
    Menu button
    Volume Upwardly push
Back and Volume Up buttons

  1. Release both buttons when you get an on-screen message that your Siri Remote is paired successfully.

Reconnect Apple Remote to Apple Goggle box

If your (aluminum or white) Apple tree Remote doesn’t support Siri, hither’s how to reconnect it to your Apple TV:

  1. Printing and agree the
    Carte du jour push button
    Left push
    for at least six seconds. That’ll unlink or disconnect the remote from your Apple Goggle box.
Menu and Left buttons

  1. Release both buttons when your Apple TV displays a
    broken chain icon atop a remote control icon.
  2. Press and concur the
    Menu button
    Right push button
    on the remote for at least vi seconds.
Menu and Right buttons

  1. Release the buttons when you see a
    linked concatenation icon higher up a remote control icon
    on your Idiot box.

7. Restart Your Apple tree TV

Power-cycle your Apple tree Goggle box if the streaming device yet won’t respond to remote inputs after trying all possible troubleshooting solutions.

Unplug the Apple tree TV’s power cord from its power outlet and expect at least six seconds. Plug the ability cord back into the wall outlet and check if your remote now responds promptly.

8. Update Apple Tv

Updating tvOS can resolve functioning issues similar connectivity bug, remote input lag, and app-specific glitches on your Apple TV. Open up the Apple Idiot box Remote in your iOS device’s Control Middle and follow these steps:

Open the
Settings app
and go to
Software Updates
Update Software. Wait a few seconds for your Apple tree TV to cheque for new tvOS updates. Select
Download and Install
to proceed.

Download and Install button

Do not turn off or unplug your Apple TV during the update. Also, refer to our tutorial on updating tvOS on Apple TV for more than dos and don’ts. You’ll also find troubleshooting fixes for possible issues that may occur while updating tvOS.

Time for a New Remote

If your Apple Television set even so won’t respond to information technology, the remote is partially or fully damaged. You lot can purchase a new Apple Television remote on Amazon or Apple’s website. The Siri Remote costs $59, while the regular Apple Remote retails for $19.

Do not share my Personal Information.

Source: https://www.switchingtomac.com/tutorials/hardware/apple-tv-not-responding-to-remote-8-ways-to-fix/